Precision CNC Tooling · US Inch Layout Studio

Kitchen & Architectural Cabinetry Layout Planner

Free online US inch kitchen and cabinetry layout tool for contractors, architects, and project planners. Configure room dimensions, doors, windows, wall-by-wall upper and base cabinet elevations, and a separate island to generate scaled drawings, 4'×8' panel takeoffs, and a CSV cut schedule. Select panel cores and finishes on woodworksamerican.com.

±1/64″ CNC Panel Sizing 32mm Frameless System EVA & PUR Edge Finishing Hardware Warranty
Cabinet Boxes 0
Linear Run 0 lf
Est. 4'×8' Panels 0 sheets
Edge Banding 0 lf
Countertop Area 0 sq ft
Review Schedule ↓
Live Estimation Takeoff · ±1/64″ (±0.4 mm) CNC Panel Sizing

Wall-by-Wall & Separate Island Cabinet Schedule

Itemized Wall-by-Wall and Separate Island Cabinet Cut Schedule
# Cabinet / Opening & Spec Elevation Row From Left Width (in) Depth × Height Action
American Woodworks Co. · Kitchen Layout & Millwork Estimation Guide

Kitchen Planning Clearances, CNC Cabinetry Standards & Pre-Bid Estimation Reference

Practical US inch clearances, field-fit filler rules, and sheet-yield benchmarks for contractors, architects, and anyone planning a kitchen. Configure your room and wall elevations above, then choose panel cores, laminates, and door finishes on woodworksamerican.com.

Commercial & Multifamily Bidding

General Contractors & Project Estimators

Estimating CSI Division 06 41 00 architectural wood casework or Division 12 35 00 multifamily, office breakroom, and healthcare cabinetry.

  • Instant box counts, linear footage, countertop area, and 4′×8′ panel estimates from room dimensions.
  • Choice of palletized 32mm RTA flat-pack components (lower freight volume) or pre-assembled casework.
  • EVA edge banding for dry residential/interior scopes and PUR adhesive where wet commercial areas are regularly exposed.
  • ADA / TAS 34″ max counter height and 30″W × 27″H open sink knee-clearance planning.
Design Coordination & Submittals

Architects & Interior Designers

Laying out coordinated US floor plans, wall-by-wall interior elevations, and AWI Custom or Premium Grade frameless cabinetry.

  • Scaled Wall A–D elevations verifying 54″ AFF upper cabinets, 38″+ window sills, and 80″ door clearances.
  • 1/8″ (3mm) uniform frameless reveals aligned within AWI 1/32″ (0.8mm) standards.
  • Verified 1.5″–2″ wall scribe fillers and 26.5″–27″ 90-degree corner clearances so drawers never collide.
  • Clean printable elevation sheets paired with panel cores, laminates, and veneers on woodworksamerican.com.
Custom Kitchens & Renovations

Kitchen Planners, Remodelers & Businesses

Planning residential kitchens, tenant build-outs, or showroom layouts in exact US inches before sending a layout to quote.

  • Unrestricted custom cabinet widths from 6″ to 144″ with automatic neighbor reflow—no wasted filler gaps.
  • Separate freestanding island view with 12″–15″ seating overhangs and 42″–48″ NKBA work-aisle guidance.
  • Built-in appliance rough-in planning for 24″ dishwashers, 30″/36″ ranges, and 36″+ refrigerators.
  • One-click downloadable CSV cabinet cut schedule and instant Send to Quote preparation.
US Kitchen Layout Clearances, Filler Allowances & Appliance Rough-In Rules
Layout Factor Recommended US Standard Key Dimensions Why It Matters on Site
NKBA Work Aisle & Walkway Widths 42″ single-cook work aisle · 48″ multi-cook / commercial aisle 36″ min non-work walkway behind island stools Measure clear floor space between 25.5″ countertop edges (not 24″ cabinet boxes) so opposing oven and dishwasher doors pass cleanly.
Wall-to-Cabinet Scribe Filler Allowance 1.5″ to 2.0″ field-scribed filler at return walls Full cabinet height (34.5″ base / 30″–42″ upper / 84″–96″ tall) Absorbs 1/4″–5/8″ out-of-plumb US drywall framing and lets 110° full-overlay doors and roll-out trays open past door/wall trim.
90° Inside Corner & Drawer Pull Clearance 24″ dead corner + 2.5″–3.0″ perpendicular corner filler Reserve 26.5″–27.0″ from raw corner on both intersecting walls Prevents perpendicular drawers and dishwasher doors from striking 1.25″–1.75″ cabinet hardware pulls.
Upper Cabinet Mounting & Window Sill Datum 54″ AFF bottom of upper cabinet (18″ backsplash clearance) 12″–15″ upper depth · 38″+ window sill clears 36″ counter Pair 30″ uppers with 84″ top alignment, 36″ uppers with 90″ top alignment, or 42″ uppers flush to 96″ (8-ft) ceilings.
Freestanding Island Overhang & Seating 12″–15″ knee overhang at 36″ counter height 24″ linear width per stool · 39″ typical slab depth Overhangs exceeding 12″ on stone/quartz require concealed steel brackets or 3/4″ structural island end panels.
Appliance Rough Openings & End Support DW: 24.0″ W × 34.5″ H · Range: 30.0″/36.0″ W · Fridge: 36.5″–37.5″ W Add 3/4″ (19 mm) structural return panel at exposed DW ends Under-counter dishwashers cannot support countertops alone—always include a 24″D × 34.5″H end panel when a dishwasher ends a run.
CNC Cabinetry Manufacturing, 4′×8′ Sheet Yield & EVA / PUR Edge Finishing Guide
Manufacturing & Takeoff Topic Specification Application & Estimation Guidance
Wood CNC Router Sizing & AWI Reveal Tolerance ±1/64″ (±0.4 mm) CNC panel sizing · 1/32″ (0.8 mm) AWI reveal alignment Industry-standard commercial wood CNC router accuracy across 3/4″ (19 mm) plywood, industrial particleboard, and MDF with 1/8″ (3 mm) frameless reveals.
4′×8′ (48″×96″) Nested Sheet Yield & Grain Match 76%–82% yield (solid/non-grained) · 65%–72% yield (grain-matched) Add 12%–15% extra sheet allowance when specifying continuous vertical or horizontal grain-matched woodgrain TFL, HPL, or architectural veneer.
EVA Edge Banding (Residential & Dry Interiors) 0.5mm interior seal · 1mm–2mm PVC, ABS, or wood veneer fronts Clean, reliable, and cost-effective standard for all residential kitchens, closets, pantries, living spaces, and dry commercial offices.
PUR Edge Banding (Regularly Wet Commercial Zones) 1mm–3mm impact-resistant PVC/ABS with moisture-cured PUR Specified where commercial casework is regularly exposed to water, steam, or frequent sanitization—healthcare sinks, commercial breakrooms, and wet hospitality.
32mm RTA Flat-Pack, Pre-Assembled & Hardware Warranty Up to 65% lower RTA freight cube · Functional hardware warranty Pre-bored 32mm RTA pallets streamline nationwide shipping and elevator access, while pre-assembled boxes suit fast commercial installs; functional cabinet hardware is backed by a manufacturer warranty.
ADA / TAS Accessible Sink & Breakroom Runs 34″ max counter AFF (32.5″ box + 1.5″ top) · 30″W × 27″H knee space Required in commercial breakrooms and accessible multifamily units per 2010 ADA Standards §804 & §606, paired with a 60″ wheelchair turn circle.
Kitchen Planning, CNC Cabinetry & Estimation Q&A
What free online tool lets you plan a US kitchen layout wall by wall in inches with upper cabinets, base cabinets, and a separate island?

The American Woodworks Kitchen & Cabinetry Layout Planner lets homeowners, remodelers, architects, and contractors draw US room dimensions in inches and feet-inches right in the browser with no login required. It generates a top-down room floor plan, four individual wall elevations (Walls A–D) with 54-inch AFF upper wall cabinets above and 36-inch base/tall cabinets and windows/doors below, a separate freestanding kitchen island view, live 4x8 panel estimates, printable drawings, and a downloadable CSV cabinet schedule.

In what order should you lay out walls, windows, appliances, and cabinets when designing a kitchen?

Start by setting exact Wall A, Wall B, Wall C, Wall D lengths and ceiling height in inches in the unified wall size bar. Second, place fixed architectural openings—entry doors and windows (noting sill height, typically 38 inches or higher above a 36-inch counter). Third, anchor primary appliances: the 36-inch sink base, adjacent 24-inch dishwasher, 30-or-36-inch range/cooktop, and 36-to-37.5-inch refrigerator housing. Fourth, fill remaining floor spans with 3-drawer banks and custom-width base cabinets (6 to 144 inches), add 12-inch deep upper cabinets at 54 inches AFF, and verify 42-to-48-inch aisles around any island.

How much wall filler and 90-degree corner space should be planned so frameless cabinet doors and drawers open without hitting walls or hardware?

Frameless (full-access European) cabinets feature doors that overlay within 1/16 inch of the box edge. Because US drywall framing commonly bows 1/4 to 5/8 inch out of plumb and doorways have raised casings, include a 1.5-to-2.0-inch field-scribed filler wherever a cabinet run meets a perpendicular wall so 110-degree hinges and pull-outs clear cleanly. At 90-degree inside corners, reserve 26.5 to 27.0 inches from the corner on both walls (24-inch cabinet depth plus a 2.5-to-3.0-inch corner filler) so drawers never strike adjacent 1.25-to-1.75-inch bar pulls.

How much floor clearance is required around a kitchen island, and how deep should a seating overhang be?

NKBA kitchen planning standards recommend at least 42 inches of clear work-aisle width between perimeter countertops and an island for a single cook, and 48 inches for multiple cooks or commercial breakrooms so opposing dishwasher and oven doors can open simultaneously. Non-work walkways behind island seating require at least 36 inches (44 inches to walk comfortably behind seated guests). Plan a 12-to-15-inch countertop overhang for 36-inch counter-height stools (creating a 36-to-39-inch total island depth) and allow 24 inches of width per stool.

What rough-in dimensions and support panels are required for dishwashers, refrigerators, and ranges in custom cabinetry?

Standard US under-counter dishwashers require a 24.0-inch wide by 34.5-inch high clear opening; if a dishwasher sits at the open end of a cabinet run, you must add a 3/4-inch structural end return panel (24 inches deep by 34.5 inches high) to carry the stone countertop. Freestanding 36-inch refrigerators require a 36.5-to-37.5-inch wide enclosure for door-hinge swing, ideally topped with a 24-inch deep flush bridge cabinet rather than a recessed 12-inch upper. Slide-in ranges require an exact 30.0-inch or 36.0-inch base opening.

When should you specify EVA versus PUR edge banding, and which tape thickness (0.5mm, 1mm, 2mm, 3mm) fits each zone?

American Woodworks Co. runs both EVA and PUR edge-banding lines so projects match real site conditions without over-specifying. EVA (Ethylene-Vinyl Acetate) hot-melt adhesive delivers clean, dependable seams and is the proven choice for all residential kitchens, closets, pantries, and dry commercial interiors. PUR (Polyurethane Reactive) moisture-curing adhesive is reserved for commercial casework regularly exposed to standing water, steam, or frequent sanitization—such as healthcare sinks, commercial breakrooms, and food-service counters. By thickness, 0.5mm tape seals concealed carcass edges, 1mm PVC/ABS or wood veneer gives residential doors and drawers a crisp micro-bevel, and 2mm–3mm radiused PVC/ABS provides heavy impact protection on commercial doors and counter edges.

What dimensional tolerance is industry standard for commercial CNC cabinet routers and AWI frameless reveals?

In commercial wood and panel manufacturing, industrial nested CNC routers and beam saws hold ±1/64 inch (±0.015 to ±0.020 inch, or ±0.4 mm) panel sizing accuracy across 3/4-inch (19 mm) domestic plywood, industrial particleboard, and MDF. For assembled frameless casework, Architectural Woodwork Institute (AWI) Custom and Premium Grade standards specify uniform 1/8-inch (3 mm) door and drawer reveals aligned within 1/32 inch (0.8 mm), respecting natural wood acclimation at 35%–55% indoor relative humidity.

How do millwork estimators calculate 4x8 cabinet sheet counts, grain-matched waste, and edge-banding linear footage?

Nested CNC cutting on 48-by-96-inch (32 sq ft) sheets achieves 76% to 82% net material yield on solid colors and non-directional cabinet cores—averaging 1.4 to 1.8 sheets per 3 linear feet of combined base and upper cabinetry. When continuous vertical or horizontal grain-matched woodgrain TFL, HPL, or veneer fronts are specified, estimators use a 65% to 72% yield factor (adding 12%–15% extra sheets for directional alignment). Exposed box fronts, adjustable shelves, and slab doors average 26 to 34 linear feet of edge banding per cabinet box.

When do contractors order 32mm RTA flat-pack cabinets versus pre-assembled boxes, and what are ADA breakroom dimensions?

Pre-bored 32mm Ready-to-Assemble (RTA) flat-pack cabinetry reduces shipping volume by up to 65% for nationwide freight and fits easily through multifamily elevators and tight remodel hallways, whereas pre-assembled casework speeds up dock-high commercial installations—with functional cabinet hardware backed by a manufacturer warranty. For commercial breakrooms and accessible multifamily units under 2010 ADA Standards (§804 and §606), work and sink counters cannot exceed 34 inches AFF (a 32.5-inch cabinet box plus 1.5-inch top) and sinks require a 30-inch wide by 27-inch high clear knee space.

Ready to Estimate Your Kitchen or Commercial Cabinetry Layout?

Review your wall-by-wall upper/base elevations and separate island schedule above, explore core substrates and finishes on woodworksamerican.com, and click Send to Quote when your layout is set.

Explore Materials & Finishes